OTTOFLEX Slurry Seal Coating

1-component, flexible composite sealing – quick-curing
Crack-bridging
Easy to use
Crack-free curing
Watertight and permeable to vapour diffusion after curing
Frost and ageing resistant after setting
Complies with building material class B2 “normally inflammable” in accordance with DIN 4102-1

For application in interior and exterior areas
Flexible composite sealing under ceramic coverings and natural stone in moisture-prone rooms and wet rooms
Flexible composite sealing under ceramic coverings and natural stone on balconies, terraces and arcades (not above used rooms) with a gradient ≥ 1.5 %
Construction waterproofing of components which have contact with the earth to protect against ground moisture and non-oppressive water, such as exterior cellar walls and supporting walls
For sealing swimming pools and solid water containers for the interior and the exterior, authorised for a water depth of up to 4 m
Suitable for substrates which are sufficiently stable such as gypsum plasterboard, gypsum fibre, screed, heated screed, concrete, masonry, cellular concrete and plasters classified by mortar groups II and III
In very wet areas conform to stress categories A and B according to abP

General building inspection certificate – Liquid seal in combination with tiles and board coverings for use as building sealant
Complies with the water action categories W0-I, W1-I, W2-I and W3-I for tear class R1-I in accordance with DIN 18534
Complies with the water action category W1-B for the tear classes R0-B and R1-B for the container sites S1-B and S2-B in accordance with DIN 18535
Conform to the stress categories A and B according to AbP
Conform to the moisture resistance classes A0 and B0 according to ZDB information sheet
Based on the inspections for awarding an AbP in accordance with PG-AIV-F and the resulting areas of application, the following stress categories can be assigned from the ÖNORM B 3407 – W1, W2, W3, W4, W5 (except areas with increased chemical stress) and W6
Watertightness tested in accordance with DIN EN 14891, table 1
GISCODE ZP1
French VOC-emission class A+