OTTOFLEX Protective Coating

Synthetic resin dispersion based on styrene butadiene
Sealing against humidity
Compatible with commercially available tile adhesives and solvent-free coatings
Compatible with OTTO silicone sealants
Ready-to-use, easily applicable by rolling, painting or trowelling
Very short drying time of 2 to 3 hours
High crack bridging ability
Free of plasticisers and solvents
Store and transport frost-free
Complies with building material class B2 “normally inflammable” in accordance with DIN 4102-1

Composite sealing in moisture-prone rooms and wet rooms underneath ceramic coverings and natural stone using the thin bed method
Suitable for very various substrates, e. g. gypsum, gypsum plasterboards, gypsum fibre, (cellular-) concrete, masonry, stone, screed

Complies with the water action categories W0-I, W1-I and W2-I for tear class R1-I in accordance with DIN 18534
General building inspection certificate – Liquid seal in combination with tiles and board coverings for use as building sealant
Conform to the moisture resistance classes A0 according to ZDB and A according to abP
Based on the inspections for awarding an AbP in accordance with PG-AIV-F and the resulting areas of application, the following stress categories can be assigned from the ÖNORM B 3407 – W1, W2, W3 and W4
GISCODE BSW10
French VOC-emission class A
EMICODE® EC 1 Plus – very low emission